Short pile roller/Squeegee
Drying Time: Rewmar RP will dry in 45 – 60 minutes per coat (@ 50% RH & 20˚C).
Fitting :
1 Coat 40m² (250g per m²)
2 Coats 24m² (350g per m²)
3 Coats 17m² (450g per m²)
Suitable :
This product is suitable for use with Underfloor Heating.
Grade :
Lengths :
Pack size :
1
Description
Rewmar RP can be applied on concrete screeds containing up to 95% RH with two – three coats. This product is not suitable for use with bitumen substrates, you must use Rewmar MB.
1 Coat: Rewmar RP can be used as fast drying adherence primer on porous / non-porous or smooth substrates (ceramic tiles, adherent and cohesive paints, traces of old glues, etc.). It can be applied either before or after applying a screed/latex but before applying Rewmar MS Polymer adhesive.
2 -3 Coats: Applied in cross layers, Rewmar RP can be used as a moisture barrier for waterproofing of absorbent surfaces up to 95%RH. Note: if the Concrete Moisture is over 75%RH and a liquid batten installation is performed then Rewmar MB must be used.
This product is suitable for use with Underfloor Heating.
Pack Size: 5 Litres / 6 Kg
Colour: Blue
Pallet Quantity: 90 Units
Coverage
1 Coat 40m² (250g per m²)
2 Coats 24m² (350g per m²)
3 Coats 17m² (450g per m²)
Application Method: Short pile roller/Squeegee
Drying Time
Rewmar RP will dry in 45 – 60 minutes per coat (@ 50% RH & 20?C).
Subfloor Preparation:
The substrates must be sound, free of splits, dust, grease or other contaminants that could affect adhesion. For substrates that are non-porous or smooth it is necessary to abrade the surface prior to application of Rewmar RP.
Cleaning:
Tools can be cleaned with acetone before primer has completely cured. After curing, abrasion is necessary
