5 Wood Flooring Installation Sins that every wood installer should avoid

When it comes to flooring, there is no better option other than wood. There are many reasons which make it one of the strongest and the most resilient flooring options for homes and offices alike. However, being a natural resource, there are a lot of things which need to be kept in mind during the installation phase. Failure to comply with these procedures might end up in some nasty surprises, which is something no home owner would like.

For this very reason, these 5 installation sins should be avoided at all times, to ensure one is able to derive maximum benefits out of their wooden flooring.

Not checking for moisture at the time of installation: Moisture can be the worst enemy of wooden flooring.However, moisture is not the only problem; the installer needs to take proper precautions to ensure the wood is stored in a proper condition, away from moisture. Unfortunately, many installers don’t take the right precautions at the time of storing the wood. In order to avoid any moisture from seeping in at the time of installation, the idea is to install the flooring at appropriate moisture content, preferably, between two extremes. At the same time, it’s best to educate the customers as well about the proper usage of Solid Wood Flooring, to ensure proper use of flooring.

Missing to prepare the subfloors: The industry layout for the subfloors means that it should be clean, dry and flat. Clean denotes that any debris should be swept off. Dry means that it should be free of any moisture while flat denotes that the floors should be well within the recent industry standards.

Experiencing a lazy layout: Different rooms in a house tend to have different dimensions. Does this mean that one size will fit all? Guess not! A good floor planner often uses the right directions before going ahead fixing the floors. However, if a lazy set of workers tend to fit in the wrong flooring in all the rooms, or try and squeeze in floors which are of the wrong dimension, it can really make the flooring go awry at the last minute.

Bad Racking: Racking a floor properly is an art; once you get the hang of it, rest assured it will seem like a piece of cake for the installer. There is a lot more to racking than just deciding where to put the boards in the rooms. Another mistake would be to blindly put in the boards, without paying too much heed to the overall look and feel of the room where the installation is taking place. While these mistakes might seem very small, they can have a tremendous impact on the flooring of your house.

Failing to nail enough: Not putting enough fasteners will be an instant deal breaker for your flooring. Many installers either fail to put enough nails or just don’t do it out of sheer laziness. Either way, it will have an adverse effect on your floors, since the floor boards would not have enough nails to hold them together. Rest assured, if this happens, you are committing one of the biggest sins in the history of flooring.

In order to have a good flooring plan, it’s imperative to approach professionals to do your work. The best way to ensure this is to use your references when it comes to hiring an installer. This way, if you know someone has already utilised the services before, you will always end up being in good hands. 

Related posts

Proceed to checkout